Kitchen and Bathroom Product Series

The Large-Format Commercial Single Bowl — Built for Serious Kitchen Operations

The BK-S3218 is a large-format commercial single bowl kitchen sink in the 32×18 inch (813×457mm) format — one of the largest single-bowl specifications in the Phase 2 range. At 813mm wide and 457mm deep with a 229mm (9 inch) bowl depth, it handles the load that commercial hotel kitchens, catering operations, and institutional dining facilities generate during peak service periods.

The sink is available in both SUS304 (standard commercial) and SUS316 (for coastal, marine, and harsh environment projects). The X-channel drainage system provides rapid water evacuation from any position in the large bowl — critical when the sink is being used continuously at capacity.

Triple-mount design supports undermount, topmount, and flush mount installation.

Key specs:

Dimensions: 32×18 inch / 813×457mm
Bowl depth: 229mm (9 inch)
Material: SUS304 or SUS316 (dual grade option)
Gauge: 16 gauge (1.5mm)
Installation: Undermount / Topmount / Flush mount (triple-mount)
Drainage: X-channel system

The 1077mm Linear Channel Built for Two — Not One

The BK-108194 is an ultra-long workstation sink designed for kitchen islands and galley layouts where two people need to work simultaneously. At 1077mm in length, it runs the full depth of a standard island counter, allowing one user to wash while another preps or dries — eliminating the bottleneck that single-station sinks create in busy kitchens.

Four functional zones are integrated into the 190mm channel: a deep wash zone, a sloped drying surface, a multi-section organiser, and a utensil station at the end. Each zone is part of the pressed stainless steel body. Four stainless steel accessories are included, designed to slide along the channel ledge.

Constructed from SUS304 stainless steel with a brushed finish. Available in SUS316 for coastal and marine environments. Undermount installation.

Key specs:

Length: 1077mm (longest linear channel in the BECASUS range)
Channel width: 190mm | Basin depth: 150mm
Material: SUS304 stainless steel (SUS316 optional)
Included: Cutlery holder, dish drainer, standard drainer, deep drainer
Installation: Undermount

60/40 Bowl Split — Built for Commercial Kitchens Where Two Tasks Run Simultaneously

The BK-6544D is a double bowl workstation sink configured in a 60/40 split — a 60% main bowl paired with a 40% secondary bowl — designed for commercial kitchen environments where two simultaneous tasks are the daily norm.

The 60/40 configuration is the commercial kitchen standard: the larger bowl handles the primary wash and rinse cycles while the smaller bowl is dedicated to prep — vegetable washing, glass rinsing, or pot soaking — without interrupting the main workflow. This division of labour is what makes the 60/40 split the standard in professional kitchen design.

The PVD gold brushed finish provides a distinct visual specification for high-end residential projects and boutique hotel environments where the sink is visible and part of the design vocabulary. The PVD coating also adds a hardened surface layer that resists scratching and maintains the brushed texture in high-use environments.

Constructed from SUS304 stainless steel. Undermount installation.

Key specs:

Dimensions: 650×440×205mm
Configuration: 60/40 double bowl
Finish: PVD Gold Brushed
Material: SUS304 stainless steel
Installation: Undermount
Bowl depth: 205mm

Four Functions in a 477mm Channel — Built for the Space-Conscious Kitchen

The BK-48192 compact workstation sink delivers four distinct functional zones—deep wash, sloped drying, compartmentalised organiser, and utensil station—within a narrow 477×190×150mm channel footprint. Designed for bar areas, island counters, butler’s pantries, and compact kitchens where full-size sinks are impractical.

Constructed from SUS304 stainless steel with a brushed finish, the BK-48192 resists corrosion in high-humidity environments and coastal installations. Topmount installation drops directly into standard bench cutouts—no specialist tooling required—making it the practical choice for renovation projects and secondary sink positions.

Key specs:

Dimensions: 477×190×150mm (channel footprint fits 50cm base cabinets)
Material: SUS304 stainless steel (SUS316 optional for coastal/harsh environments)
Installation: Topmount
Included accessories: Cutlery holder (146×160×101mm) + dish drainer (300×160×61mm)

SUS304 stainless steel undermount kitchen sink, 16 Gauge - the commercial kitchen thickness specification in a standard rectangular format. Handmade construction with tight-radius corners for maximum usable bowl volume. X-groove drainage. Undermount installation for seamless bench transition. For residential and light-commercial kitchens that need the durability of a heavy-gauge sink.

The 927mm Channel That Fills the Gap Between Compact and Ultra-Long

The BK-93194 is an elongated workstation channel sink positioned between the compact 627mm BK-63193 and the ultra-long 1077mm BK-108194. At 927mm, it provides substantial channel length for large kitchen islands and commercial preparation areas — long enough to support multiple simultaneous stations, but not so long that it exceeds standard island counter depths.

The 190mm channel width and 150mm depth accommodate commercial cookware sizes. Four stainless steel accessories are included: cutlery holder, dish drainer, deep drainer, and a glass rack — each sized to the channel geometry and designed to slide along the integrated ledge.

Constructed from SUS304 stainless steel with a brushed finish. Undermount installation. Available in SUS316 for coastal and marine environments.

Key specs:

Length: 927mm (middle-length channel in the BECASUS range)
Dimensions: 927×190×150mm
Material: SUS304 (SUS316 optional)
Accessories: Cutlery holder, dish drainer, deep drainer, glass rack
Installation: Undermount