Luxury Modern Design SUS304/316 Floor Standing Wash Basin Bathroom Above Counter Mounted Vanitary Pedestal Sink

Semi-Freestanding — Floor Presence Without the Full Height

The BB-2801 occupies a specific design niche: it delivers the visual language of a floor-standing pedestal — exposed column, no cabinet — in a compact 380mm total height that works above a standard vanity cabinet, custom bench, or even directly on a low platform. If you want the pedestal aesthetic without committing to an 830mm column, the BB-2801 is the answer.

Design Language: Minimal Column, Maximum Intent

The 380mm cylinder column is intentionally compact. It doesn’t try to fill the space between floor and basin — it creates a deliberate visual pause. The result is a basin that reads as floor-standing in concept but adapts to any installation height by varying what it sits on.

Three Installation Options:

1. On a standard vanity cabinet — the BB-2801 sits atop existing cabinetry, replacing a standard drop-in or undermount basin while maintaining full under-sink storage

2. On a custom floating shelf or bench — the column bridges the gap between bench and floor, adding visual interest without the bulk of a full-height pedestal

3. Directly on a low platform or step — for architect-led designs where the basin sits elevated, the BB-2801’s shorter column is proportionately correct

SUS 304/316 Stainless Steel — No Cabinet Required

Without a vanity cabinet to hide behind, the BB-2801 needs to look good from every angle. The SUS 304/316 stainless steel construction delivers — the column is a single, seamless piece with no visible joints, seams, or fixings.

Product Dimensions

Who This Is For:

The BB-2801 is for projects where design intent conflicts with practical constraints. Powder rooms where a full 830mm pedestal would feel dominant in a small space. Master ensuites where a vanity cabinet is needed for storage but the basin aesthetic matters. Boutique hospitality projects where a compact, considered basin piece is preferable to a generic vanity.

The Difference from BB-1822:

FAQ

Q: Can the BB-2801 be installed without a vanity or bench?
A: Yes — the BB-2801 can be floor-mounted directly using a floor flange and fixing screws, just like the BB-1822. However, at 380mm total height, the basin rim will sit lower than a standard basin height when floor-mounted. For code-compliant installation without a vanity, the BB-1822 (830mm) is the correct choice.

Q: What vanity cabinet height works best with the BB-2801?
A: The BB-2801 is designed to sit atop cabinetry, bringing the total rim height to a standard 820–850mm. A standard 720mm vanity cabinet height plus the 380mm BB-2801 gives an effective rim height of approximately 1100mm — on the high side. A lower cabinet (600–650mm) or a floating shelf at that height produces a more ergonomic result.

Q: Is the column hollow for plumbing?
A: Yes — the BB-2801’s column is hollow, allowing internal routing of waste pipework from the basin drain to the floor or wall outlet. Plumbing is concealed within the stainless column, maintaining the clean exposed-column aesthetic.

Q: How does the basin attach to the column?
A: The basin bowl and column are separate components joined by a concealed mechanical fixing. The connection is fully internal and not visible once installed. The basin-to-column join is watertight and structural.

Q: What is the warranty on this product?
A: The BB-2801 is covered by BECASUS’s standard product warranty covering manufacturing defects in material and construction. See the full warranty policy or contact your account representative for specific terms.

Floor-Standing Form, Adaptable Stature.

The BB-2801 semi-freestanding pedestal gives you the considered aesthetics of a floor-standing basin — the exposed column, the absence of cabinetry — in a compact form that works with your vanity, your bench, or your custom design.