Bathroom Linear Shower Drainer Tile Insert Floor Drainer Easy Clean Stainless Steel Shower Drain

Bold Gold, Built to Last

The BD-A21C in brushed gold makes the drain a visible design element in the bathroom. The solid brushed gold panel is the primary face — bold enough to stand out against stone, concrete, or textured tile surfaces. The reverse accepts a piece of floor tile if you want the drain to disappear into a seamless floor. One product, two installation choices.

Brushed Gold Finish — A Bold Statement in the Shower

Unlike the understated silver linear drains, the BD-A21C in brushed gold makes the drain a visible design element in the bathroom. The warm gold tone complements marble, stone, and textured tile surfaces without the clinical look of chrome. The brushed finish resists water marks and fingerprints — more forgiving than polished gold in a wet environment.

Tile Insert — Seamless Floor Integration

When you want the drain to disappear, flip the BD-A21C’s cover to reveal the tile-insert frame. Drop in a piece of your floor tile — marble, limestone, or matching porcelain — and the drain becomes nearly invisible. This is the choice for minimalist wet rooms and open-plan bathrooms where every visual seam matters.

SUS 304 Stainless Steel — Built for the Wet Room

The BD-A21C body is constructed from SUS 304 stainless steel, chosen for its corrosion resistance in wet environments. Linear drains handle higher water volumes than point drains, which means the body and the seal are under more constant pressure. The BD-A21C’s material specification reflects that demand.

Wide Coverage, Low Profile

At 1000mm length and only 100mm width, the BD-A21C covers a wide drainage path while sitting flush with the floor. The low profile means it works in both new build and retrofit wet room applications without requiring significant floor build-up.

Product Dimensions

How the Three Covers Compare:

FAQ

Q: How does the tile insert work?
A: The BD-A21C cover is designed with a shallow recessed frame on the reverse side. Cut your floor tile to fit within this frame and glue it in place — when installed, the tile sits flush with the surrounding floor surface, making the drain virtually invisible.

Q: What is the advantage of the BD-A21C over the solid cover?
A: The BD-A21C’s primary face is the solid brushed gold panel — the look you’d specify when the drain should be a visible feature. The tile insert reverse is there when you want the drain to blend in. Both options are available in one product, so the specification doesn’t need to be locked in before you see the site.

Q: Is the brushed gold finish durable in a wet environment?
A: Yes. The brushed gold finish is achieved through PVD (Physical Vapour Deposition) coating, which chemically bonds the gold-tone layer to the stainless steel. This makes it significantly more resistant to wear, scratching, and moisture damage than standard electroplated gold finishes.

Q: What floor thicknesses can the tile insert accommodate?
A: The tile insert recess is designed for standard stone and porcelain tile thicknesses (typically 8-12mm). Thicker tiles may need to be ground to fit; thinner tiles may require a backfilling compound.

Q: How do I clean the linear drain?
A: Remove the cover and rinse the channel with warm water. A soft brush and mild detergent will keep the channel clear. The removable cover makes regular maintenance straightforward without specialist tools.

Make the Drain Part of the Design — or Let It Disappear.

The BD-A21C gives the bathroom floor a choice: a visible brushed gold feature, or a seamless tile-integrated drain that keeps the eye moving across the surface uninterrupted.